Electrolux SIG 450 Cleaning The Door Glass, Installing the cooker, Location, Installation

Models: SIG 450

1 44
Download 44 pages 3.48 Kb
Page 27
Image 27
Cleaning The Door Glass

S I G 4 5 0

Cleaning The Door Glass

Installing the cooker To prevent damaging or weakening the door glass panels avoid the use of the following:

Location Household detergents and bleaches

Installation Impregnated pads unsuitable for non-stick saucepans

Manual background Brillo/Ajax pads or steel wool pads

Manual background Chemical oven pads or aerosols

Manual background Rust removers Manual background Bath/Sink stain removers

Manual backgroundIf the door glass panel becomes chipped or has deep scratches the glass will be weakened and must be replaced to prevent the possibility of the panel shattering. Please contact your local Service Centre who will be pleased to advise further.

Installing the cooker

For your safety

This cooker must be installed and serviced by a competent person as stated in the Gas Safety (Installation & Use) regulations current editions and the IEE Wiring Regulations.

It is important that the cooker is suitable for your gas supply. Your installer should check the data badge.

Make sure that a stability bracket is fitted.

Location

For your safety

The use of a gas cooking appliance results in the production of heat and moisture in the room in which it is installed. Ensure that the kitchen is well ventilated: keep natural ventilation holes open or install a mechanical ventilation device (mechanical extractor hood).

Prolonged intensive use of the appliance may call for additional ventilation, for example opening of a window, or more effective ventilation, for example increasing the level of mechanical ventilation where present.

For further details see page 37.

Installation

27

Page 27
Image 27
Electrolux SIG 450 Cleaning The Door Glass, Installing the cooker, Location, Installation, For your safety, S I G 4 5