Electrolux SIG 450 Lighting the cooker, Hotplate & Grill, To light, For your safety, S I G 4 5

Models: SIG 450

1 44
Download 44 pages 3.48 Kb
Page 4
Image 4
Lighting the cooker

Lighting the cooker

S I G 4 5 0

Lighting the cooker

The system works by means of an electric spark system. Details about the plug are given on page 29.

Hotplate & Grill

To light

1.Lift up the lid. You cannot use the hotplate when the lid is down.

2.Push in the control knob and turn it to the large flame symbol (highest setting), and press the ignition button immediately. When the burner has lit release the button

RAPID

3. Leave the grill door open when you are using the grill.

Warning: If the ignition button is not pressed immediately a build up of gas may cause the flame to spread.

For your safety

If you close the lid of the cooker while any of the hotplate burners are lit the gas will go out. This is because it would be dangerous if the burners stayed on when the lid was closed.

Always use the control knob to turn off a burner. Do not use the lid as a cut-off device. This will only cut off the gas when the lid is closed. The gas will flow again when the lid is opened.

Please note: If you have any trouble lighting a hotplate burner turn all the hotplate control knobs off and make sure the hotplate burner parts have been replaced correctly.

See page 23 for more information.

4

Page 4
Image 4
Electrolux SIG 450 installation instructions Lighting the cooker, Hotplate & Grill, To light, For your safety, S I G 4 5