Dell V515W manual Memory card troubleshooting checklist, Reinsert The Memory Card

Error Message:

No Answer

No Caller ID Call Stopped

What it indicates:

Auto Answer may have been turned off on the receiving fax machine.

Your printer stopped the call because the incoming fax has no sender information. You may have chosen to block faxes with no Caller ID or faxes without Caller IDs are not allowed in your country or region.

Possible solutions:

•Verify the number, and then resend the fax.

•Set the printer to redial.

Note: Depending on your country or region, there may be a limit on the number of redial attempts, regardless of the redial settings that you set in your printer.

•Schedule to resend the fax at a later time.

Disable Block No-ID.

To troubleshoot error messages in the fax software, click Help to view the help information for the fax software.

Memory card troubleshooting

•“Memory card troubleshooting checklist” on page 118

•“Nothing happens when a memory card is inserted” on page 118

•“Cannot print documents from a memory card or flash drive” on page 119

•“Photos do not transfer from a memory card across a wireless network” on page 119

Memory card troubleshooting checklist

Before you troubleshoot, use the following checklist to solve most memory card problems:

•Make sure that the memory card you are using can be used in the printer.

•Make sure you insert the memory card into the correct slot.

•Make sure the memory card is not damaged.

•Make sure memory card contains supported file types.

Nothing happens when a memory card is inserted

If the "Memory card troubleshooting checklist" does not solve the problem, then try one or more of the following:

REINSERT THE MEMORY CARD

The memory card may have been inserted too slowly. Remove and then reinsert the memory card quickly.

CHECK THE USB CONNECTION

1Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.

2Firmly plug the square end of the USB cable into the back of the printer.

Troubleshooting

118