Scanning to a flash drive or memory card

7Press the arrow buttons to select the resolution quality and the original image size. Press each time you make a selection.

8Press to start scanning.

The scan is complete when the application you selected in step 6 opens on the destination computer, and the scan appears within the application as a new file.

Scanning to a flash drive or memory card

Before you begin, make sure your flash drive or memory card is not write protected.

1Load an original document faceup into the ADF or facedown on the scanner glass.

2From the printer control panel, press .

3When Scan to appears on the display, insert the flash drive or memory card.

4Press the arrow buttons to scroll to USB Flash Drive or Memory Card, and then press .

5Press the arrow buttons to select the resolution quality, the type of output you want to create, and the original image size. Press each time you make a selection.

6Press to start scanning.

The scan is complete when a message appears on the printer control panel indicating that the file you scanned has been saved.

Scanning photos into an editing application

Using the printer control panel

1Load the photo or photos facedown on the scanner glass.

2From the printer control panel, press .

3Press the arrow buttons to scroll to Computer or Network, and then press .

4Press the arrow buttons to select the name of a local or network computer, and then press . The local or network computer is the destination that will receive the scan.

5Wait until the printer has finished downloading the list of scan applications available on the selected computer.

6Press the arrow buttons to select a photo editing application, and then press .

7Press the arrow buttons to select the resolution quality, the type of output you want to create, and the original image size. Press each time you make a selection.