Fig.4a

If the wiring is extended or a completely new cable fitted a 3-pin 13 amp plug should be fitted. (See Fig.4a). Connect the wires as follows:

BROWN to the Live Terminal. BLUE to the Neutral Terminal.

GREEN and YELLOW to the Earth Terminal.

As the colours of the wires in the mains lead which you fit may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is GREEN and YELLOW must be connected to the terminal in the plug which is marked with the letter 'E' or

by the earth symbol or coloured GREEN or GREEN and

YELLOW.

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter 'N' or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter 'L' or coloured RED.

FIT A 3 AMP FUSE TO THE PLUG HOLDER.

Ensure that the supply cable cannot get caught by the stability bracket. Plug in the appliance.

6. PRESSURE TESTING

1 The oven injector is used as a pressure test point.

Remove the oven furniture. Remove oven burner box retaining clips (one spring clip from each side) and remove box front cover. Replace one clip back into the right hand side of the burner box.

Remove oven burner by removing the spring clip from the right hand side of the oven burner and slide burner off injector whilst easing it forward and taking care not to strain the F.S.D. phial.

2.Connect the pressure gauge to the oven injector.

3.Check the supply pressure by turning the thermostat on and one hotplate tap full on and light the appropriate burner. The pressure should be either:-

(i)For Natural Gas 20mbar

(ii)For LP.Gas The pressure must be set to 28 mbar for use on butane or 37 mbar for use on propane. Turn off the taps, disconnect the pressure gauge and replace oven burner and cover, ensuring that the

F.S.D. phial is correctly located into the bracket on the burner.

5.Check operation of oven.

7. CHECKING THE GRILL

Place the grill pan containing the grid, with the handle attached, into the grill compartment. Light the grill burner by turning the grill tap to its full on position and pushing the ignition button. As soon as the burner is lit the button can be released.

8. CHECKING THE HOTPLATE

Fit the burner crowns and caps ensuring that they are correctly seated. Fit the pan supports. Check each of the hotplate burners in turn by turning the hotplate tap to it's full on position and pushing the ignition button.

As soon as the burners are lit the button can be released.

46

Page 46
Image 46
Electrolux SIG 553 installation instructions Pressure Testing, Checking the Grill, Checking the Hotplate

SIG 553 specifications

The Electrolux SIG 553 is a modern washing machine that combines efficiency, technology, and user-friendly features to enhance laundry day experiences. Designed with the contemporary household in mind, this model stands out for its innovative functionalities and eco-friendly performance.

One of the key features of the Electrolux SIG 553 is its Energy Efficiency. Rated highly in energy consumption, this washing machine helps users save on electricity bills while minimizing their environmental footprint. It uses advanced motors and inverter technology, ensuring that operations are energy-efficient without compromising on washing performance.

The SIG 553 is equipped with a generous capacity, accommodating large loads of laundry effortlessly. This is particularly beneficial for families or those who frequently do laundry, as it allows for fewer wash cycles and greater convenience. The drum design is also optimized for better load distribution, which enhances washing performance and reduces wear on fabrics.

Another hallmark of the Electrolux SIG 553 is its range of Smart Programs. Tailored wash cycles are designed to cater to various fabric types and soiling levels, ensuring that clothes are treated with the utmost care. Features like the "Delicate" cycle safeguard fragile items, while the "Heavy-duty" cycle tackles tough stains and heavily soiled garments with ease.

The machine also incorporates a user-friendly interface with easy-to-navigate controls, allowing users to customize washing settings effortlessly. Additionally, it features a clear digital display that provides real-time feedback on wash progress, remaining time, and cycle selection.

Water efficiency is another consideration in the design of the SIG 553. It features smart water sensing technology that adjusts water levels depending on the load size, effectively saving water without sacrificing washing quality.

Furthermore, noise reduction technology ensures that the Electrolux SIG 553 operates quietly, making it suitable for various living environments, including apartments or homes where noise can be disruptive.

In conclusion, the Electrolux SIG 553 is an exemplary washing machine that integrates modern technology and eco-friendly solutions. With its energy and water efficiency, large capacity, smart washing programs, and quiet operation, it promises to meet the demands of today’s busy households while delivering exceptional cleaning results.