TO REMOVE THE WIREWORK RUNNERS
The wirework runners in all compartments can be removed for cleaning.
1.Remove all shelves and furniture from the compartment.
2.Hold the wirework at the bottom and gently pull towards the centre of the grill / oven.
3.Unhook the runner at the top and remove it from the cavity.
4.To replace, hook the wirework back into the oven sides.
Ensure that the wirework runners are firmly in place before refitting the oven shelves.
CLEANING THE SHELVES, WIREWORK RUNNERS AND OVEN FURNITURE
Soak the oven shelves, plate rack, wirework runners and grilling grid in hot water to which a little washing up liquid has been added. If the shelves are heavily soiled a soap impregnated steel wool pad can be used.
The grill pan, grill deflector, meat tin and trivet can be cleaned using a soap impregnated steel wool pad.
All items of grill and oven furniture are dishwasher safe with the exception of the grill pan handle.
CARE OF STAYCLEAN SURFACES
During normal use the Stayclean coating in the Top and Ultra Fan ovens will become splashed with fats and food residues. By running the oven without food, the Stayclean surfaces burn off any soilage. Regular use of the oven cleaning cycle will help to keep the panels in good condition.
Damage will occur if soap impregnated steel wool pads, aerosol cleaners or any abrasive cleaners are used.
THE OVEN CLEANING CYCLE
The Top and Ultra Fan ovens may be cleaned using the cleaning cycle. The ovens should be cleaned separately.
1.Remove oven shelves, wirework runners and bakeware from oven.
2.Turn the required oven temperature control to 220°C and allow the oven to run for an hour or so.
Cavity side 
32
