Electrolux U27107 manual Location, Door Opening, Toe Grille Installation / Removal, Leveling

Installation

This Owner’s Guide provides specific operating instructions for your model. Use the fridge-freezer only as instructed in this Use & Care Manual. Before starting the fridge-freezer follow these important first steps.

LOCATION

•Choose a place that is near an earthed 13A socket. Do Not use an extension cord or an adapter plug.

•If possible, place the fridge-freezer out of direct sunlight and away from the cooker, dishwasher or other heat sources.

•The fridge-freezer must be installed on a floor that is level and strong enough to support a fully loaded fridge-freezer.

•Consider water supply availability for models equipped with an automatic ice maker.

INSTALLATION

Do Not install the fridge-freezer where the temperature will drop below 55°F (13°C) or rise above 110°F (43°C). The compressor will not be able to maintain proper temperatures inside the fridge-freezer.

Do Not block the toe grille on the lower front of your fridge-freezer. Sufficient air circulation is essential for the proper operation of your fridge-freezer.

Installation Clearances

To Install Toe Grille:

1.Open freezer and fresh food compartment doors.

2.Line up toe grille at base of fridge-freezer,

making sure the four bottom tabs are resting through holes at base of cabinet.

3.Starting from left side of toe grille, press in on

first top tab using your thumb and push toe grille forward until it snaps in place. Continue this process until all tabs are snapped in place and toe grille is secured to fridge-freezer.

•Allow the following clearances for ease of installation, proper air circulation, and plumbing and electrical connections:

Sides & Top --------------- 3/8” (1 cm) Back ------------------------ 1” (2.5 cm)

DOOR OPENING

NOTE: If your fridge-freezer is placed with the door hinge side against a wall, you may have to allow additional space so the door can be opened wider.

Your fridge-freezer should be positioned to allow easy access to a counter when removing food. For best use of drawers and freezer baskets, the fridge-freezer should be in a position where both the refrigerator and freezer doors can be fully opened.

TOE GRILLE INSTALLATION / REMOVAL

To Remove Toe Grille:

1.Open freezer and fresh food compartment doors.

2.Working from left side of toe grille, slip your fingers between top of toe grille and cabinet. Gently pull forward until first set of tabs are free. Slide your hand down past the free tabs and pull forward again until the second set of tabs are free. Continue this process until all tabs are free and the toe grille can be removed. (See graphic at top of page in right column.)

5

LEVELING

All four corners of your fridge-freezer must rest firmly on a solid floor.Your fridge-freezer is equipped with adjustable front rollers to help level your unit. To ensure proper door seal and assist door closing, the fridge-freezer should be tilted 1/4” (6 mm), front to back.

To LevelYour Fridge-Freezer:

1.Remove toe grille.(See “To RemoveToe Grille”.)

2.Use flat-blade screwdriver or 3/8” socket wrench to adjust

front rollers.

NOTE: The fridge-freezer doors are designed to shut by themselves within a 20 degree opening.

3.Check both doors to be sure seals touch cabinet on all four sides.