Installation - Connecting Ice Maker To Water Supply

To avoid electric shock, which can cause death or severe personal injury, disconnect the fridge- freezer from electrical power before connecting a water supply line to the fridge-freezer.

To Avoid Property Damage:

•Copper tubing is recommended for the water supply line.Water supply tubing made of ¼” plastic is not recommended since it greatly increases the potential for water leaks. Manufacturer will not be responsible for any damage if plastic tubing is used for supply line.

•DO NOT install water supply tubing in areas where temperatures fall below freezing.

•Chemicals from a malfunctioning softener can damage the ice maker. If the ice maker is connected to soft water, ensure that the softener is maintained and working properly.

IMPORTANT: Ensure that your water supply line connections comply with all local plumbing codes.

Before Installing The Water Supply Line,You Will Need

•Basic Tools: adjustable wrench, flat-blade screwdriver, and PhillipsTM screwdriver

•Access to a household cold water line with water pressure between 20 and 100 psi.

•A water supply line made of ¼ inch (6.4 mm) OD, copper tubing. To determine the length of copper tubing needed, you will need to measure the distance from the ice maker inlet valve at the back of the fridge-freezer to your cold water pipe. Then add approximately 7 feet (2.1 meters), so the fridge-freezer can be moved out for cleaning (as shown).

•A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type shutoff valve.

•A compression nut and ferrule (sleeve) for connecting the water supply line to the ice maker inlet valve.

To Connect Water Supply Line To Ice Maker Inlet Valve

1. Disconnect fridge-freezer from electric power source.

2. Place end of water supply line into sink or bucket. Turn ON water supply and flush supply line until water is clear. Turn OFF water supply at shut off valve.

3. Unscrew plastic cap from water valve inlet and discard cap.

4. Slide brass compression nut, then ferrule (sleeve) onto water supply line, as shown.

5. Push water supply line into water valve inlet as far as it will go (¼ inch). Slide ferrule (sleeve) into valve inlet and finger tighten compression nut onto valve. Tighten another half turn with a wrench; DO NOT over tighten.

6. With steel clamp and screw, secure water supply line to rear panel of fridge-freezer as shown.

7.Coil excess water supply line (about 2½ turns) behind fridge-freezer as shown and arrange coils so they do not vibrate or wear against any other surface.

8. Turn ON water supply at shutoff valve and tighten any connections that leak.

9. Reconnect fridge-freezer to electrical power source.

10. Make sure ice maker power switch is turned On (See page 14 for location of power switch).

IMPORTANT: It takes approximately 24 hours for the ice maker to begin producing ice. Air in new plumbing lines may cause ice maker to cycle two or three times before making a full tray of ice. New plumbing may cause ice to be discolored or have poor flavor. Discard ice made during the first 24 hours.

6

Page 5 Page 7
Page 6
Image 6
Electrolux U27107 manual Installation Connecting Ice Maker To Water Supply
Page 5 Page 7

U27107 specifications

The Electrolux U27107 is a versatile and powerful vacuum cleaner designed to meet the diverse cleaning needs of modern households. Combining style, functionality, and advanced technology, it stands as a reliable choice for those seeking an efficient cleaning solution.

One of the standout features of the U27107 is its powerful motor, which delivers exceptional suction performance. This ensures that dirt, dust, and debris are effectively removed from various surfaces, including carpets, hardwood floors, and upholstery. The vacuum cleaner's ability to adapt to different carpet heights makes it particularly user-friendly, as it effortlessly transitions from one surface to another without losing suction power.

The U27107 is equipped with advanced filtration technology, including a HEPA filter that captures 99.97% of particles as small as 0.3 microns. This feature is especially beneficial for allergy sufferers, as it helps to maintain a cleaner indoor environment by trapping allergens and promoting better air quality. Additionally, the vacuum's dust bag is designed to hold more dirt while minimizing the risk of dust clouds being released when changing bags.

Another notable characteristic of the Electrolux U27107 is its ergonomic design, which enhances user comfort during cleaning sessions. The vacuum features a lightweight construction, making it easy to maneuver around furniture and navigate stairs. Its adjustable handle allows for customization to suit different users, further enhancing comfort.

Convenience is also a key theme in the design of the U27107. The vacuum cleaner comes with a set of versatile attachments, including a crevice tool, dusting brush, and upholstery nozzle. These tools enable users to tackle various cleaning tasks, from reaching tight corners to dusting delicate surfaces. The cord-rewind feature simplifies storage, allowing users to neatly wrap the cord without hassle.

Furthermore, durability is a focus in the engineering of the Electrolux U27107. Constructed with high-quality materials, this vacuum cleaner is built to withstand regular use without compromising on performance. With its blend of power, efficiency, and innovative design, the Electrolux U27107 is an excellent choice for anyone looking to elevate their home cleaning routine.
Top Page Image Contents