Electrolux U30024 Removing The Doors, To remove the refrigerator door, To remove the freezer door

Removing The Doors 7

To remove the refrigerator door:

1Trace lightly around the door’s top hinge with a pencil. This makes reinstallation easier.

2Remove the two screws from the top hinge. Lift the door off of the bottom hinge and and set it aside.

3Remove the three bottom hinge screws and hinge if necessary.

To reinstall the refrigerator door, reverse the above steps. Once both doors are in place, also replace the

top hinge cover.

! CAUTION

Be sure doors are set aside in a secure position where they cannot fall and cause personal injury.

To remove the freezer door:

1 Detach the multi-wire cable connector located above the top hinge. Grasp both sides of the connector firmly and pull apart.

2 Trace lightly around the hinge with a pencil. This makes reinstallation easier.

3 Detach the water tube from the connector located below the freezer door. The connector releases when you press its outer sleeve inward.

4 Remove the screws from the top hinge.

Leave the multi-wire cable inside the hinge.

Do not unscrew the ground wire that attaches the cable to the hinge. Lift the

door off of the bottom hinge.

5 Remove the three bottom hinge screws and hinge if necessary.

6 Lay the door on its side to avoid damage to the water tube extending from the bottom hinge.

To reinstall the freezer door, reverse the above steps. Once both doors are in place, also replace the top hinge cover.