Before Use

Packaging

01. Remove all adhesive tape and packaging from the interior of the appli- ance.

3 Any remnants of adhesive can be removed with white spirit.

2.Remove the transport protection pieces and pull off the adhesive tape.

3.Wash the inside of the appliance with lukewarm water with a little bicarbonate of soda added (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger. Dry the appliance thoroughly.

Fitting the Door Handle

1 Caution! Do not overtighten the screws (max. 2 Nm) as you may damage the door handles.

0 1. Screw the top handle bracket to the handle rod (1). Fit the bottom han-

dle bracket on the lower left-hand side of the door (2).

2.Fit the top handle bracket on the top left-hand side of the door (3)

and screw the handle rod to the bottom handle bracket (4).

8

818 35 94-01/2

Page 8
Image 8
Electrolux U31462 Before Use, Fitting the Door Handle, Packaging, Dle bracket on the lower left-hand side of the door