Electrolux U3701, U3702 | ASSEMBLING THE VACUUM CLEANER, BEFORE STARTING, GETTING THE BEST RESULTS, Hard Floors

ASSEMBLING THE VACUUM CLEANER

BEFORE STARTING

1. Open the dust bag compartment lid.

2. Check that the dust bag is in place.

3.Insert the hose until the catch clicks to engage. Grip the hose connection and press the catches to disengage for removal.

4.Attach the extension tube to the bent end hose handle and the floor nozzle.

5.Pull out the cable and plug it into the power outlet. Remove the plug from the power outlet by the plug not by the cable.When activating the rewind pedal, guide the cable into the cleaner with your hand to prevent it from whipping.

it from whipping.

6.Press the On / Off pedal with your hand to start and stop the vacuum cleaner.

7.Adjust the suction power using the variable power control knob on the vacuum cleaner or the suction control on the hose bent end handle.

GETTING THE BEST RESULTS

Hard Floors

Use the dual purpose floor nozzle with the pedal as shown.

3