Electrolux U3701, U3702 | MAINTENANCE, REPLACEMENT OF THE MICRO, EXHAUST FILTER

MAINTENANCE

REPLACEMENT OF THE MICRO

EXHAUST FILTER

We recommend that the micro exhaust filter is inspected at the same of replacing or washing the motor filter. If it is found to be heavily soiled it should be replaced.

1.Open the filter grille positioned at the rear of the Cleaner.

The vacuum cleaner stops automatically if the nozzle, tubes or hose becomes blocked or if the filters are blocked, this is due to a safety precaution which prevents the motor from overheating.The vacuum cleaner is to be switched off by the switch pedal and at the mains power outlet and the plug removed from the power outlet, grasping the plug not the cord for removal.

2.Remove the micro exhaust filter from the rear housing, inspect the condition of the filter. If heavily soiled replace the filter. Micro exhaust filter Part No F9000 (Menalux)

3.Place the micro exhaust filter into the rear housing.

4.Fit the grille into the rear housing ensuring the locating tabs are located in position and push the grille for the latch to lock.

Allow the vacuum cleaner to cool down for approximately 30 minutes before resumption of cleaning.

6