An accumulation of dust will affect |
|
the performance of the appliance and |
|
cause excessive electricity consump- |
|
tion. The structure of the appliance |
|
permits you to clean the rear zone |
|
close to the wall, using a vacuum | 3 2 1 |
cleaner. |
|
☞1. Remove the plinth (1), then the venti- lation grid (2);
2.Carefully pull the air deflector out (3),
checking that there is no water left from the defrosting.
Energy Saving Tips
•Do not install the appliance near boilers, radiators or other sources of heat. High ambient temperatures cause longer, more frequent operation of the compressor.
•Ensure sufficient air circulation and exhaust at the appliance base and at the back wall of the appliance. Never cover air vent openings.
•Do not place warm foods into the appliance. Allow warm foods to cool first.
•Do not leave the door open any longer than necessary.
•Do not set temperature any colder than necessary.
What to do if ...
Correcting Malfunctions
A malfunction may be caused by only a minor fault that you can recti- fy yourself using the following instructions. Do not perform any other work on the appliance if the following information does not provide assistance in your specific case.
Important! Repairs to refrigerators/freezers may only be performed by competent service engineers. Improper repairs can give rise to signifi- cant hazards for the user. If your appliance needs repairing, please contact your specialist dealer or your local Service Force Centre.
24
