Electrolux WRM3500_A-R Operation, removed by simply twisting the both ends of the ice cube tray

OPERATION

Making a test run

1. Clean the Refrigerator thoroughly. Wipe the external surface with a soft dry cloth, the interior with a damp cloth.

2.Keep the door open and plug the power cord into its own electrical outlet. The interior lamp should lit.

3.Turn the thermostat dial to “7”. Close the door and allow the unit to operate for 15-20 minutes. The evaporator should then show some traces of frost. The compressor will run smoothly with just a soft humming sound.

4.lf the test run is not satisfactory, check your power supply (blown fuse). Contact your appliance dealer or appliance authorized Service Center if the source of trouble cannot be traced.

Temperature Control

You can control the inside temperature by turning the thermostat dial.

Turn the button to the left for warmer temperature. Turn the button to the right for colder temperature.

Making Ice Cubes

Fill the ice cube tray 3/4-full with cold water and place it on the bottom of the freezer compartment. When the ice-cubes are ready they can easily be

removed by simply twisting the both ends of the ice cube tray.

4