Electrolux NaCl (1,5 kg)

ENGLISH
19
How to fill the salt container
• Switch off the dishwasher by pressing button “A”
(Figure 13).
• Unscrew cap "A" (Fig. 18) of the salt container, tur-
ning it anticlockwise.
Fig. 18
• Pour approx. 1.5 kg of coarse salt [NaCl] in container "A"
(an amount sufficient to fill the salt container up to the rim)
using the special funnel supplied (Fig. 19) .
Fig. 19
• Remove any traces of salt from the filling hole, the
container thread and the closing cap seal.
• Refit the cap of container "A", turning it clockwise and
making sure it is tight.
The salt container always has water in it, therefore it is
normal if water comes out during filling.
IMPORTANT:
only salt may be placed in the salt con-
tainer. Do not introduce any other chem-
ical substances such as detergent, rinse
aid or descaling agent, since these
would inevitably damage the appliance.
Such damage invalidates any warranty
and relieves the manufacturer of all lia-
bility.
A
NaCl
(1,5 kg)
!
IMPORTANT:
The message SAL 0 may appear for
several wash cycles even after topping-
up the salt, as the salt must circulate in
the entire system. Correct operation of
the dishwasher is not, however, affec-
ted.
!