Assembly Parts
4
3
5
2 | 6 |
1 7
How To Assemble
CAUTION: Assemble the cleaner before using.
CAUTION: Moving parts, make sure ON/OFF switch is in the OFF position before plugging in.
1 Grasp dustbag cover handle and pull away from vacuum body to remove door.
2 Slide the handle into the grooves at the top of the vacuum body as shown.
3 Place the two screws (supplied) into the holes at the top of the dustbag compartment and tighten with a screwdriver.
4
1Crevice Nozzle or
Nested Extension Tubes (on some models).
2Dusting Brush.
3Hose.
4Vacuum Cleaner Body.
5Electrical Cord.
6Handle.
7Screws located in the accessory package.
4 Place the tabs on the bottom of the dustbag cover into slots at the b o t t o m o f t h e b a g compartment and rotate door up and push against the vacuum body until it snaps shut.
5 Place the hose on the back of the vacuum, wrapping it up and over the hose hook as shown.
6 Firmly push the end of the hose into the hose retainer on the back of the vacuum.
