Electrolux Z2250 series How To Assemble continued, ON/OFF Switch, Helpful Information, How To Use

Models: Z2250 series

1 12
Download 12 pages 61.39 Kb
Page 5
Image 5
How To Assemble (continued)

How To Assemble (continued)

How To Use

7Pull the electrical cord up to the cord retainer and firmly push down into retainer. This will keep the cord out of the way the next time you vacuum.

8Wind the cord around the two cord hooks on the back of the vacuum.

9Secure plug to the cord to prevent unwinding.

10Store the crevice tube or extension tubes (on some models) on the side of the vacuum in front of the hose.

WARNING: Avoid injury. Keep loose clothing, hair, fingers, and all other parts of body away from any moving part (such as the revolving brush). Turn off the switch and unplug the cleaner before changing the floor type selector.

ON/OFF Switch.

International symbol I means On, International symbol O means Off.

Handle Release. Step on handle release to pull handle back to a comfortable operating position. To lower handle completely to the floor, depress handle release a second time.

Helpful Information:

Before cleaning under low furniture, check area first for objects that might harm the cleaner or block the vacuum hose.

Floor Type Selector. An adjustment that raises or lowers the cleaner base to match the type of floor surface. With the cleaner cord unplugged, set the adjustment to lowest setting for

maximum carpet cleaning. If the cleaner is difficult to push, move adjustment to next highest setting until cleaner is comfortable to push. The brushroll must reach the carpet for

effective cleaning. For ease in moving the adjustment knob,

place handle in operating position and tilt cleaner back to remove weight from front wheels.

11Store the dusting brush.

Helpful Information:

Listen to your cleaner. If you notice a change in the sound of the motor or a change in performance, it could simply indicate a common usage or maintenance issue, such as: a need to raise or lower the carpet height adjustment; possible blockage in hose or brushroll area; or a broken or loose brushroll belt. These are all easy to fix and the instructions are included in this handbook. Becoming familiar with the information in this guide will help you to get the best possible performance from your new cleaner for many years to come.

5

Page 5
Image 5
Electrolux Z2250 series manual How To Assemble continued, ON/OFF Switch, Helpful Information, How To Use