How To Use (continued)
12
14
12
17
12
13
15
16
15
18
12.Hose Retainers. Place hose on retainers to store hose on unit.
13.Carrying Handle. Use this handle to carry unit from one place to another.
14.Dusting/Upholstery Brush. Store dusting brush here.
15.Electrical Cord Hooks. Wrap electrical cord around them to store electrical cord on unit. Top hook rotates down for quick release of the electrical cord. Rotate back up to store electrical cord.
16.Clear Tube Quarter Turn Fastener. Turn this fastener to the unlock position to remove the clear tube. To replace tube, place tube on the back of the unit and turn fastener to lock position.
17.Crevice Tool. Store crevice tool here.
18.Hose Adapter. Place the end of the hose into hose adapter for floor/carpet cleaning.
Thermal Cut Off
This cleaner has a special thermostat that protects the cleaner in case of motor overheating. If the cleaner suddenly turns off, follow this procedure:
1.Push on/off switch to off.
2.Unplug cleaner.
3.Check for source of overheating problem (i.e. full dust cup, clogged hose or clogged filters).
4.If a full dust cup, clogged hose or clogged filters are found, empty the dust cup, unclog the hose or replace the filters.
5.Wait at least 30 minutes before attempting to reuse the cleaner.
6.After 30 minute cool down period, plug the cleaner in and push the switch pedal. The cleaner should turn on.
7.If the cleaner still does not operate, call 08706 055 055 for customer assistance.
