If the wiring is extended or a completely new cable fitted a 3-pin 13 amp plug should be fitted. (See Fig.4a). Connect the wires as follows:

BROWN to the Live Terminal. BLUE to the Neutral Terminal.

GREEN and YELLOW to the Earth Terminal.

As the colours of the wires in the mains lead which you fit may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is GREEN and YELLOW must be connected to the terminal in the plug which is marked with the letter 'E' or by

the earth symbol or coloured GREEN or GREEN and

YELLOW.

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter 'N' or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter 'L' or coloured RED.

FIT A 3 AMP FUSE TO THE PLUG HOLDER.

Ensure that the supply cable cannot get caught by the stability bracket.

6. PRESSURE TESTING

Fig.4a

Plug in the appliance.

1The oven injector is used as a pressure test point.

Remove the oven furniture. Remove oven burner box retaining clips (one spring clip from each side) and remove box front cover. Replace one clip back into the right hand side of the burner box.

Remove oven burner by removing the spring clip from the right hand side of the oven burner and slide burner off injector whilst easing it forward and taking care not to strain the F.S.D. phial.

2.Connect the pressure gauge to the oven injector.

3.Check the supply pressure by turning the thermostat on and one hotplate tap full on and light the appropriate burner. The pressure should be either:-

(i)For Natural Gas 20mbar

(ii)For LP.GasThe pressure must be set to 28 mbar for use on butane or 37 mbar for use on propane.

4.Turn off the taps, disconnect the pressure gauge and replace oven burner and cover, ensuring that the F.S.D. phial is correctly located into the bracket on the burner.

5.Check operation of oven.

7. CHECKING THE GRILL

Place the grill pan containing the grid, with the handle attached, into the grill compartment. Light the grill burner by turning the grill tap to its full on position and pushing the ignition button. As soon as the burner is lit the button can be released.

8. CHECKING THE HOTPLATE

Lift the lid. Fit the burner crowns and caps ensuring that they are correctly seated. Fit the pan supports. Check each of the hotplate burners in turn by turning the hotplate tap to it's full on position and pushing the

ignition button. As soon as the burners are lit the button can be released.

9. CHECKING LID SHUT-OFF DEVICE

1.Lift the lid.

2.Turn one hotplate burner tap to its full on position and push the ignition button.

3.Close lid. There should now be no gas supply to the hotplate and the burner will go out.

4.Turn off the hotplate tap and lift the lid. The gas supply should now be restored to the hotplate. When the tap is turned on.

49

Page 48 Page 50
Page 49
Image 49
Electrolux ZCG 7902 manual Pressure Testing, Checking the Grill, Checking the Hotplate, Checking LID SHUT-OFF Device
Page 48 Page 50

ZCG 7902 specifications

The Electrolux ZCG 7902 is a powerful and efficient canister vacuum cleaner that offers advanced features and technologies designed to simplify your cleaning routine. Known for its exceptional performance and user-friendly design, this vacuum is ideal for a variety of surfaces, making it suitable for both home and office use.

One of the standout features of the ZCG 7902 is its robust suction power. Equipped with a high-performance motor, it delivers strong suction that efficiently removes dirt, dust, and allergens from carpets, hardwood floors, and upholstery. The vacuum's adjustable suction settings allow users to customize the power level according to the surface being cleaned, ensuring optimal performance whether dealing with delicate fabrics or deep-pile carpets.

The ZCG 7902 is designed with the advanced Cyclonic Cleaning Technology. This innovative technology separates dirt from air, preventing clogs and maintaining powerful suction over time. As a result, users can enjoy consistent cleaning performance without the hassle of frequent filter cleaning.

Another significant feature of this vacuum is its multi-cyclone filtration system. This system effectively captures fine dust and allergens, releasing cleaner air back into your living space. This is particularly beneficial for allergy sufferers, as it helps to create a healthier indoor environment.

The vacuum's ergonomic design includes a lightweight body, making it easy to maneuver around the house. Additionally, its compact size allows for convenient storage when not in use. The ZCG 7902 also comes with a range of attachments and accessories, including a dusting brush, crevice tool, and upholstery nozzle. These versatile tools ensure that every corner and surface can be reached and cleaned with precision.

Moreover, the vacuum features a large dust container, reducing the frequency of emptying and allowing for extended cleaning sessions. An easy-to-clean design simplifies maintenance, ensuring that users can keep their vacuum in optimal condition with minimal effort.

In conclusion, the Electrolux ZCG 7902 combines powerful suction, innovative technologies, and user-friendly features to deliver a top-tier cleaning experience. Whether you are tackling everyday messes or deep cleaning tasks, this vacuum is equipped to meet your needs while ensuring a cleaner and healthier home. With its focus on performance and ease of use, the ZCG 7902 stands out as a reliable choice for anyone in search of an exceptional canister vacuum cleaner.
Top Page Image Contents