Congratulations and good fortune!
We congratulate you to your selection of Oxy3etage or ZCV750W Central vacuum cleaners from Electro- lux that will give you many years of enjoyment and good use. These units are built on current technology for central vacuum cleaners, an entirely new way of thinking. The units, with their modern design and compact construction are most easy to place. With their new electronics, the units can be connected to normal electrical sockets without slow fuses. Since you have been wise enough to choose a big and established brand, it means security in the way of modern design, quality, service and spare parts. Your new central vacuum cleaner is tested and approved according to the requirements of the authorities. Carefully read this manual before you use the vacuum cleaner.
Safety instructions
Read these instructions carefully before installing and using your central vacuum cleaner to ensure your full satisfaction with the unit.
•The central vacuum cleaner is only designed for traditional cleaning. It is therefore forbidden to vacuum fluids, ashes and sharp items.
•Never use the vacuum cleaner in spaces where there might be burning or easily combustible fluids or gases.
•Always pull out the plug when servicing the unit.
•When you pull out the plug, pull by the plug, never the flexible cord.
•The main fuse must be 10Amps.
•The central vacuum cleaner must not be installed in a li- mited space. The dimensions of the space must be (mm) 490x570x700 (WxDxH).
•Never cover the central unit.
•Follow the instructions carefully.
•Servicing the central vacuum cleaner must only be carried out by an authorised servicing company. Always use spare parts and accessories that are recommended by the manufacturer. Never try to make any changes yourself to the central vacuum cleaner.
•Never use the central vacuum cleaner with a damaged connec- tion cord.
The central vacuum cleaner has a special cord that must always be replaced with a similar one, which can be purchased at an authorised service company.
•Never use the vacuum cleaner without a dust bag
•Save this manual for future use.
Technical Specifications
Model | ZCV750W | Oxy3etage |
Width mm | 460 | 460 |
Height mm | 330 | 440 |
Depth mm | 220 | 310 |
Power supply V | 230 | 230 |
Fuse Amp | 10 | 10 |
Protection class | IP11 | IP11 |
Engine | ||
| ||
Capacity max W | 1600 1 | 600 |
Capacity nominal W | 1400 | 1400 |
Airflow max litres/second* | 52 | 52 |
Vacuum max* Kpa | 27 | 27 |
Suction capacity max* W | 554 | 554 |
Suction capacity incl. | W 360 | 360 |
system |
|
|
Dust collection % | Carpet 76, | Carpet 76, |
| Floor 99 | Floor 99 |
Noise level at unit dB(A) | 68 | 68 |
Bag size, litres | 8 | 8 |
Net weight kilos | 6,0 | 8,0 |
Filter | Washable | Washable |
| carbon filter | HEPA 12 |
Overheating protection | Yes | Yes |
Colour | White | White |
|
|
|
* measured at the unit
Recycling
We have chosen only high quality materials for this product. This product is not to be treated as household waste. It should be handed in for recycling. By ensuring that the product is handled in a correct manner, you will contribute to evade any negative environmental and health effects that may arise if the product is dispo-
sed of as household waste. For further information on recycling, you should contact your local authorities or the shop were you purchased this equipment.
Your connection with Electrolux
For questions about products, spare parts, maintenance, guaran- tees etc., please contact your local Electrolux company. You can find their address at www.electrolux.com
ZCV750W
Installing a wallboard for traditional mounting
We are assuming that for this type of installation, the pipes for inlet and outlet are hidden in the wall. Light built walls; the four screws of the wall plate are usually fixed on top of the boarding into the wooden elements of the wall. An extra beam is needed for the screws of one side. This is to be done before doubling the wall. To be able to get at the two connections on the wall plate, the boarding behind the plate is to be removed. Solid walls; the inlet and outlet pipes are mounted, and the wall is subsequently doubled. For porous concrete and brick walls, channels for the pipes are to be made. These channels are to be filled before surface treatment of the wall is carried out. Picture 1.
When installing the pipes, include a
