Setting the water softener electronically (see table)
The water softener is factory set at position 5.
The dishwasher must be switched off. Switch on the dishwasher by pressing the On/Off button.
To change the level, press function button 1. Each time the button is pressed the level increases. (For the selection of the new level see the chart).
Press and hold simultaneously function buttons 2 and 3 until the lights of function buttons 1, 2 and 3 start flashing.
The digital display indicates the new level set. (Level 1 follows level 10).
Release the buttons | The digital display |
and then press function | indicates the current |
button 1; the lights of | level. |
function buttons 2 and 3 |
|
turn off while function |
|
button 1 goes on |
|
flashing. |
|
To memorise the operation, switch off the dishwasher by pressing the On/Off button.
11