Electrolux ZDF 501 user manual Fitting under a counter, Levelling

Models: ZDF 501

1 32
Download 32 pages 53.73 Kb
Page 26
Image 26
Fitting under a counter

Fitting under a counter

By removing the dishwasher’s worktop, you can install it under a close fitting sink unit or a pre-existing top.

Be sure that once the appliance has been installed, it is easily accessible for the service engineer in the event that a repair is required.

Unscrew the two screws

Push the top backwards

Lift top at the front and

at the rear.

about 1 cm.

remove it.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on either side of the cabinet.

Check if the dishwasher

If not, loosen or tighten

is levelled.

the adjustable feet until

 

the appliance is

 

perfectly levelled.

26

Page 26
Image 26
Electrolux ZDF 501 user manual Fitting under a counter, Levelling