Swann 4 CCTV Cameras Security Monitoring System warranty Trouble Shooting, Package Contents

Trouble Shooting

No Image On Screen: Ensure power is correctly turned on. Check that video cable is correctly connected and the connector has been plugged in properly.

Blurry Image: Ensure lens is correctly fitted and if necessary re adjust focus by rotating the lens until image is clear.

Package Contents

1.4ch Security Kit Monitor

2.Monitor DC Power Adaptor (design may vary depending on country)

3.4 x Security Cameras

4.4 x RCA - DIN Signal Cable

Image is too Bright or too Dark: Adjust the Brightness or Contrast knobs on the back of the monitor until the image is clear.

Flicking Image: Adjust the V-Hold knob on the back of the monitor until the image is stable.

Image not Switching: Ensure the Switching Mode button is set to AUTO, you can also rotate the Dwell Time knob to the shorter time setting.

How do I use the Audio/Video outputs on the monitor?

You will need to purchase an A/V cable with RCA male connections, plug one and into the Audio/Video output sockets on the back of the monitor, and the other end into your TV or monitor’s Audio/Video input sockets.

If you have an A/V TV with RCA sockets you will need to switch the TV to the AV channel to view the image. To view the image connected to your VCR, you will need to select the AV input you have connected this security monitor to on the VCR, turn your TV onto the channel you would normally use to view a tape or movie on your VCR. This channel may be activated by a button on your remote that is marked with this symbol , or L1 or L2 or possibly AV1 or AV2 . Please read the instructions for your VCR or TV for more information on using their A/V inputs.

1

WARNING: IMPORTANT

NOTICE ABOUT CORRECT

USE OF POWER ADAPTER

The correct orientation for the enclosed power adapter is in a vertical or floor mount position.

L’orientation correcte pour L’adapteur secteur fourni est dans une position verticale ou plancher- monte.

La orientacion correcta para el adaptador electrico incluido es en posicion vertical o instalado en el suelo.

3

2

4

FCC NOTICE WARNING STATEMENT

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation