Something not working
IMPORTANT!
The dishwasher will not start or stops during operation.
Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer.
Switch off the dishwasher, open the door and carry out the following suggested corrective actions.
| Fault code / malfunction | Possible cause | Solution | |
The dishwasher does not fill with | The water tap is blocked | Clean the water tap. | ||
or furred with limescale. |
| |||
water. |
| |||
The water tap is turned off. | Turn the water tap on. | |||
- continuous flashing of the | ||||
|
| |||
| light of the running programme | The filter (where present) | Clean the filter in the. | |
- | appears in the digital | in the threaded hose fitting at | threaded hose fitting. | |
the water inlet valve is blocked. |
| |||
| display | The water inlet hose has | Check the water inlet hose | |
|
| not been correctly laid or it is | connection. | |
|
| bent or squashed. |
| |
|
|
| ||
The dishwasher will not drain. | The sink spigot is blocked. | Clean out the sink spigot. | ||
- continuous flashing of the |
|
| ||
| light of the running programme | The water drain hose has | Check the water drain hose | |
|
| |||
- | appears in the digital | not been correctly laid or it is | connection. | |
bent or squashed. |
| |||
| display |
| ||
|
|
| ||
|
|
| ||
- continuous flashing of the | Close the water tap and contact | |||
| light of the running programme |
| your local Service Force Centre. | |
-
appears in the digital display
| The dishwasher door has | Close the door | |
| not been properly closed. |
| |
The programme does not start. |
|
| |
The main plug is not plugged in. | Insert the mains plug | ||
| |||
| The fuse has blown in the | Replace the fuse. | |
| household fuse box. |
| |
| Delay start has been selected | If dishes are to be washed | |
|
| immediately, cancel the delay | |
|
| start. | |
|
|
|
Once these checks have been carried out; close the dishwasher’s door and switch on the appliance. Press the button of the programme that was running before the intervention of the alarm. The programme will continue from the point at which it was interrupted.
If the malfunction or fault code reappears contact the Service Force Centre.
For other fault codes not described in the above chart, please contact your Service Force Centre.
20
