9
Do not keep the control knob pressed for more than 15
seconds.
If the burner does not light even after 15 seconds, release the
control knob, turn it the "off" position and wait for at least one
minute before trying to light the burner again.
When switching on the mains, after installation or a power cut, it is quite
normal for the spark generator to be activated automatically.
In the absence of electricityIn the absence of electricity
In the absence of electricityIn the absence of electricity
In the absence of electricity, ignition can occur without the electrical
device; in this case, approach the burner with a flame, push the relevant
knob down and turn it anti-clockwise until it reaches the maximum position.
If the control knobs become difficult to turn, please contact your local
Service Force Centre.