Element Electronics ELCHW261 = I .----

For subscribers to Basic Cable "rv Service

For basic cable service not requiring a Converter/Descrambler box, connect the CATV 75 ohm Coaxial Cable

directly into the Antenna Jack on the back of the television.

For subscribers to Scrambled Cable "IV Service

If you subscribeto a cable service which requires the use of a Converter/Descrambler box, connect the incoming

cable to the Converter/Descrambler box and connect the output of the box to the Antenna Jack on the back of

the television. Follow the connections as shown below. Set the television to the output of the

Converter/Descrambler box (usually channel 3 or 4) and use the Converter/Descrambler box to select channels.

For Subscribers to Unscrambled Basic Cable with Scrambled Premium Channels

If you subscribe to a cable service in which basic cable channels are unscrambled and premium channels require

the use of a Converter/Descrambled box, you may wish to use a two-set signal splitter (sometimes referred to

as a two-set coupler) and an A/B Switch box from the cable installer or an electronics supply store. Follow the

connections shown below. With the switch in the B position, you candirectly tune any unscrambled channels on

your TV. With the switch in the A position, tune your TV to the output of the Converter/Descrambler box (usually

channel 3 or 4) and use the box to tune scrambled channels.

ANT 75

= I .----

-- _ Splitter A/BSwitch LT _

Note:

When you use aconverter box with your TV, there may be features that you cannot

program when using the remote control.