English
EL-Skyport Modules
• Universal Receiver for all makes of Flash with a SYNC socket, conforming to Sync norms!
EL-Skyport Transceiver RX
•This Transceiver is only for Elinchrom RX units. The module operates all RX features with the
EL-Skyport USB RX SPEED (NEW) / USB RX (previous version)
•To operate RX flash units via computer the USB module should be used in conjunction with the
Universal Speed | Transceiver RX | USB RX Speed |
& Universal | 19353 | & USB RX |
|
Troubleshooting
Should an error occur, first check the following points:
Having this problem? | Check the following points: |
|
|
|
|
No flash unit can be triggered | Check if the Transmitter is switched ON. |
|
with the Transmitter | Check battery polarity. |
|
Mode “All” is selected | Check if the Receiver module is connected correctly to the unit. |
|
| Check if the frequency selector switch is set to the same channel. |
|
| Check if Transmitter is in the same trigger mode Speed or Standard. |
|
|
|
|
Some units do not fire when | Check if the Channel selector switch is set to the same Group. |
|
triggered with the Transmitter | Reduce distance to any “not working” unit. |
|
Mode “Grp” is selected | Check if Transmitter is in the same trigger mode Speed / Standard. |
|
|
|
|
TEST flash works, but the camera | Check |
|
will not trigger flash unit | Connect the 2.5 mm to PC SYNC cable instead of |
|
|
|
|
Limited Distance range | Reposition the units. |
|
| Increase the distance to walls and ceilings. |
|
| Position the antenna of Transmitter and Receiver. |
|
| Use an RX extension cable to reduce the distance between the modules. |
|
|
|
|
| 20 | |
