Elinchrom BX 250RI, BX 500RI operation manual Charge Ready Beep Features, Charge Ready Beep Setup

Charge Ready Beep Features English

This feature creates a melody if settings are different between each unit to improve the acous- tical recognition that all the flashes have fired and recycled.

Charge Ready Beep Setup

•Setting

-Press “Audio” button, less than 0.5 seconds to switch the Charge Ready Beep (ON / OFF)

•LED Indication

-Charge Ready Beep LED is on: Audio is active

-Charge Ready Beep LED is off: Audio is inactive (Mute)

•Changing Charge Ready Beep -On-Time Setting

-Press Audio button for more than 2 seconds until the display shows “A.X” (“X” is the value from 1 up to 7)

-Use the Flash-Power” up and down button to change the value settings

-The display switches back to normal mode after approx. 4 seconds if no button was pressed. The settings are automatically stored.

-Standard setting is: “A.3”

Value A	1	2	3	4	5	6	7
Beep-On-Time in m/seconds	70	140	210	280	350	420	490

12