Screen Operation & Maintenance
Note: Always pull the screen down or retract in a 90‐degree vertical angle. To avoid damaging the viewing surface, do not allow the viewing material to touch the screen case when deploying or retracting the unit.
1.Pull the screen down from the lanyard or from the handle only in a 90‐degree angle. Do not attempt to pull the screen down by the surface, as it will damage the screen and void the warranty.
2.To retract the screen back into its case, simply pull the screen down more than 2 inches and let the screen retract by quickly and gently releasing it up.
Note: The interval auto‐lock mechanism system will cause the screen to stop and lock on the position at intervals.
Note: Always release the screen at a 90‐degree angle and do not let go until the screen is entirely inside the case. Keep in mind the screen’s mechanism is new and needs to be deployed/retracted a few times to loosen up. If the screen feels stuck, carefully, with a little force, yank the screen straight down to unlock the unit.
Note: Improper pulling on the screen to deploy/retract will damage material and/or the rolling system.
Maintenance
To clean the viewing material, use a soft cloth with mild soap and water. In order to keep the viewing surface clean, it is recommended to keep the screen retracted into its housing case when not in use.
www.elitescreens.com | - 3 - | info@elitescreens.com |