STEP 5-Connecting the Power Cable
Connectionson underside
AC power cable port
Cable management clip
Power cable
Depending on where you live, you will use either the European or US/Canadian power cable.
•Connect the female end of the power cable to the power port on the touchmonitor.
•Route the cable through the cable management clip.
NOTE: To protect your equipment against risk of damage from electrical surges in the power line, plug the touchmonitor’s power cord into a surge protector, and then connect the surge protector to a grounded AC electrical outlet.
STEP 6-Replacing the Back Cover
When all the cables have been connected:
•Replace the back stand cover.
•Power on your PC then your touchmonitor. After a brief pause the picture should appear.
