Chapter 2 –Installation
Unpacking the Touchmonitor
Open the carton and verify the following items are present:
Touchmonitor with protective sheet for its face
Elo TouchTools CD & User Manuals CD
Quick Install Guide
Japanese language regulatory information pamphlet
DVI cable (depending on model purchased)
VGA cable USB cable
REMOTE OSD controller
Connector Panel & Interfaces
Touchmonitor Connections
1.Connect the DVI or VGA video cables between the monitor’s DVI/VGA input connectors and your DVI/VGA video source respectively. Tighten the video cable’s screws with the best performance.
2.Connect the USB touch cable between the monitor’s USB connector & your PC’s USB port.
3.Connect a 12VDC power supply to the monitor’s input power jack.
4.The touchmonitor ships in an ON state, video should be displayed on your monitor already.
User Manual – 1940L
SW601787 Rev A - Page 5 of 26
