Chapter 2 –Installation
Unpacking the Touchmonitor
Open the carton and verify the following items are present:
•Touchmonitor with protective sheet for its face
•Elo TouchTools CD & User Manuals CD
•Quick Install Guide
•Japanese language regulatory information pamphlet
•DVI cable
•VGA cable (depending on model purchased)
•USB cable
•Mounting brackets
Connector Panel & Interfaces
Touchmonitor Connections
1.Connect the DVI or VGA video cables between the monitor’s DVI/VGA input connectors and your DVI/VGA video source. Tighten the video cable’s screws for best performance.
2.Connect the USB touch cable between the monitor’s USB connector & your PC’s USB port.
3.Connect a 12VDC power supply to the monitor’s input power jack.
5. The touchmonitor ships in an ON state, video should be displayed on your monitor already.
User Manual – 2243L
SW601560 Rev A - Page 5 of 20
