Connector Panel & Interfaces
Touchmonitor Connections
1.Connect the HDMI, DVI, or VGA video cables between the monitor’s HDMI/DVI/VGA input connectors and your HDMI/DVI/VGA video source. Tighten the video cable’s screws for best performance.
2.Connect the USB touch cable between the monitor’s USB connector and your PC’s USB port. (Not applicable for
3.Connect the power cable to the monitor’s input power jack and the AC power outlet.
4.The touchmonitor ships in an ON state, video should be displayed on your monitor already.
User Manual: 3243L/3209L
SW200146 Rev A, Page 6 of 28
