Panasonic DMR-ES16 warranty If the antenna connector doesn’t match

If the antenna connector doesn’t match

Use one of the following connections to suit the antenna lead to the unit’s RF IN terminal, and the 75 Ω coaxial cable to the antenna terminals on the equipment (television etc.). Refer to other equipment’s operating instructions.

Type		This unit	Other equipment (television etc.)
A twin lead		300–75 Ω
	from the antenna
		transformer	75–300 Ω
	(Flat) Twin lead		transformer	VHF or UHF
			75 Ω coaxial
	300 Ω cable	To this unit’s RF IN
			cable	Television
		terminal
A twin lead and	from the antenna
a coaxial plug
	(Flat) Twin lead	VHF/UHF	VHF/UHF band separator	VHF
		band mixer
	300 Ω cable		75 Ω coaxial	UHF
		To this unit’s	cable	Television
	(Round)
		RF IN terminal
	75 Ω coaxial cable
Two twin leads	from the antenna
	(Flat) Twin lead	VHF/UHF		VHF
		band mixer	VHF/UHF band separator
	300 Ω cable
				UHF
			75 Ω coaxial
		To this unit’s		Television
			cable
	300–75 Ω	RF IN terminal
	transformer

STEP 1 Connection

Connecting an amplifier or system component

nConnecting an amplifier with a digital input

terminal

• To enjoy multi-channel surround on DVD- Video, connect an amplifier with a built-in decoder displaying these logo marks using an optical digital audio cable and change the settings in Digital Audio Output

(Ô page 39).

• Before purchasing an optical digital audio cable, check the terminal shape of the connected equipment.

• You cannot use DTS Digital Surround decoders not suited to DVD.

•Even if using this connection, output will be only 2 channels when playing DVD-Audio.

Amplifier’s rear panel

OPTICAL IN

Optical digital audio cable Do not bend sharply when connecting.

Insert fully, with this side facing up.

This unit’s rear panel

nConnection to a stereo amplifier

Amplifier’s rear panel

AUDIO IN

R L

Red White

Audio cable

Red White

This unit’s rear panel

RQT8950

11