To specify a time to stop recording –One Touch Recording
During recording
Press [* REC] to select the recording time.
• The unit’s display changes as shown below.
OFF 0:30 | OFF 1:00 | OFF 1:30 | OFF 2:00 |
Counter (cancel) | OFF 4:00 | OFF 3:00 | |
•This does not work during scheduled recordings (Ô page 20) or while using Flexible Recording (Ô below).
•If you change the channel or recording mode while recording is paused, the time specified to stop recording is cancelled.
•The unit turns off automatically after the time to stop recording is reached.
To cancel
Press [* REC] several times until the counter appears.
•The time to stop recording is cancelled; however, recording continues.
To stop recording partway
Press [g].
Flexible Recording
(Recording that fits the remaining disc space)
RAM
The unit sets the best possible picture quality that fits the recording within the remaining disc space. The recording mode becomes FR mode. Refer to “FR (Flexible Recording)” (Ô page 17).
Preparation
Select the channel or the external input (IN1, IN2 or DV) to record.
1 While stopped
Press [F Rec].
|
| Flexible Recording |
|
| ||||
|
| Record in FR mode. |
| Maximum recording | ||||
| Max recording time | 8 Hour 00 Min. |
|
| ||||
|
|
| ||||||
| Set recording time | 1 Hour 30 Min. |
|
| time | |||
|
|
|
|
|
|
|
| This is the maximum |
|
|
|
|
|
|
| ||
|
| Start |
| Cancel |
|
| recording time in FR | |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| mode. |
2 Press [w,q] to select “Hour” and “Min.” and press [e,r] to set the recording time.
•You can also set the recording time with the numbered buttons.
•You cannot record for more than 8 hours.
3 When you want to start recording
Press [e,r,w,q] to select “Start” and press [ENTER].
Recording starts.
To exit the screen without recording |
| ||
Press [RETURN]. | e.g., |
| |
To stop recording partway |
|
|
|
| Remaining | ||
Press [g]. | Rec. 0:59 |
| |
To show the remaining time | CH 71 |
| time of |
Stereo |
| recording | |
Press [STATUS]. |
| ||
|
|
| |
Playing while you are recording
RAM
Playing from the beginning of the title you are
Press [q] (PLAY) during recording.
• There is no sound output while searching forward or backward.
To stop play
Press [g].
To stop recording
2 seconds after play stops Press [g].
To stop scheduled recording
1Press [g] to stop playing.
2 After 2 seconds, press [g].
3 Press [w,q] to select “Stop recording” and press [ENTER].
Playing a title previously recorded while recording– Simultaneous rec and play
1 Press [DIRECT NAVIGATOR] during recording.
2 Press [e,r,w,q] to select a title and press [ENTER].
•There is no sound output while searching forward or backward.
To stop play
Press [g].
To stop recording
1Press [g] to stop playing.
2Press [DIRECT NAVIGATOR] to exit screen.
3 Press [g].
To stop scheduled recording
1Press [g] to stop playing.
2Press [DIRECT NAVIGATOR] to exit screen.
3 Press [g].
4 Press [w,q] to select “Stop recording” and press [ENTER].
Selecting audio to record
RAM
Press [AUDIO].
Stereo: Main audio (stereo)
•If the broadcast is “Mono+SAP”, audio will be monaural even if you select Stereo mode.
SAP Secondary audio program (SAP)
Audio: • If recorded in SAP mode, main audio is also recorded.
Mono: Main audio (monaural)
•Select “Mono” if reception is poor during a stereo broadcast.
| |
e.g., “Stereo” is selected | CH 12 |
(( Stereo |
“((” appears when the unit is receiving the audio type you selected.
•If you change the sound setting while recording, the recorded sound will also change.
Select the audio (Main or SAP) in “Multi- channel TV Sound ( MTS )” in the Setup menu (Ô page 39).
Recording television programs
RQT8950
19
