On-Screen Display OSD Control Box | Elo TouchSystems ET2039L

On-Screen Display (OSD) Control Box

On-Screen Display (OSD) Control Box

OSD Control Buttons

The On-Screen Display (OSD) Control Box, included with your ship- ment, allows you to change settings on the monitor screen. It has four buttons:

1AUTO/SEL (select)

2DOWN

3UP

4MENU

OSD Menu Functions

Use the control buttons for the following functions:

Control Function

MENU Displays/exits the OSD Menus

UP 1) Enters contrast of the OSD (if no

OSD is currently displayed on screen)

2)Increases value of OSD adjustment choice

3)Selects OSD choice counterclockwise

DOWN 1) Enters brightness adjustment (if no OSD is currently displayed on screen)

2) Decreases value of OSD adjustment choice AUTO/SEL 1) Automatically adjusts the image on the screen (this

function not available for ET2039L-xxEx models)

2) Selects adjustment choices from the OSD menus

After adjusting the values, the monitor will automatically save the changes.

Elo TouchSystems ET2039L User Guide 15

Image 15

Elo TouchSystems ET2039L manual On-Screen Display OSD Control Box, OSD Control Buttons

Contents

ET2039L 20” LCD Touchmonitor User Guide Elo TouchSystems ET2039L 20” Touchmonitor User Guide Revision D Elo TouchSystems ET2039L User Guide Copyright 2008 Tyco Electronics. All Rights ReservedDisclaimer Trademark Acknowledgments Appendix A Touchmonitor Safety Table of ContentsChapter 2 Installation And Setup Chapter 4 Troubleshooting INTRODUCTION About the ProductC H A P T E R INSTALLATION AND SETUP Check that the following items are present and in good condition Unpacking Your Touchmonitor Interface Connection Connector Panel on Rear side of MonitorTo connect your touchmonitor to your computer Installing the Touch Driver If the AutoStart feature is not active Monitor Mounting Orientation Rear View of Monitor-Landscape OrientationRear View of Monitor-Portrait Orientation 90º 90º Landscape Mounting Orientation Angle Views Portrait Mounting Orientation Angle Views OPERATION About Touchmonitor Adjustments On-Screen Display OSD Control Box OSD Control Buttons1 AUTO/SEL select 2 DOWN 3 UP 4 MENU OSD Menu Functions OSD Lock/Unlock Power Lock/Unlock OSD Control Options Display Information Recall DefaultsRecall Recall Color Miscellaneous Sharpness Preset Display Modes Refer to the On-Screen Display OSD TROUBLESHOOTINGSolutions to Common Problems ProblemSuggestions APPENDIX TOUCHMONITOR SAFETY Waste Electrical and Electronic Equipment WEEE Directive Care and Handling of Your Touchmonitor TECHNICAL SPECIFICATIONS ET2039L Speciﬁcations Weight Video Signal ConnectorPower Input Dimensions HxWxD ET2039L 20” LCD Touchmonitor Dimensions REGULATORY INFORMATION I. Electrical Safety InformationII. Emissions and Immunity Information B Notice to Users in Canada This equipment complies with the Class A limits for radio noise emissions from digital apparatus as established by the Radio Interference Regulations of Industry Canada a Verify as an emission source by turning the equipment off and on III. Safety Label WARRANTY Product less depreciation calculated on a straight-line basis over Seller’s stated Warranty Period Touch Monitor Newsletter Check out Elo’s WebsiteGet the latest Product information Speciﬁcations News on upcoming events Press release Software drivers