If the AutoStart feature is not active | Elo TouchSystems ET2039L

2Choose Next. Select “Search for the best driver for your device (Recommended)” and choose Next.

3When a list of search locations is displayed, place a

checkmark on “Specify a location” and use Browse to select the \EloUSB directory on the Elo CD-ROM.

4Choose Next. Once the Elo TouchSystems touchscreen driver has been detected, choose Next again.

5You will see several ﬁles being copied. Insert your Windows 98 CD if prompted. Choose Finish.

If Windows XP, Windows 2000, Windows 98, or Windows Me does not start the Add New Hardware Wizard:

1a Insert the Elo CD-ROM in your computer’s CD-ROM drive. If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the CD and starts the setup program.

2a Follow the directions on the screen to complete the driver setup for your version of Windows.

If the AutoStart feature is not active:

1Click Start > Run.

2Click the Browse button to locate the EloCd.exe program on the CD-ROM.

3Click Open, then OK to run EloCd.exe.

4Follow the directions on the screen to complete the driver setup for your version of Windows.

Elo TouchSystems ET2039L User Guide 10

Image 10

Elo TouchSystems ET2039L manual If the AutoStart feature is not active

Contents

ET2039L 20” LCD Touchmonitor User Guide Revision D Elo TouchSystems ET2039L 20” Touchmonitor User Guide Trademark Acknowledgments Copyright 2008 Tyco Electronics. All Rights ReservedDisclaimer Elo TouchSystems ET2039L User Guide Chapter 4 Troubleshooting Table of ContentsChapter 2 Installation And Setup Appendix A Touchmonitor Safety About the Product INTRODUCTIONC H A P T E R INSTALLATION AND SETUP Unpacking Your Touchmonitor Check that the following items are present and in good condition Connector Panel on Rear side of Monitor Interface ConnectionTo connect your touchmonitor to your computer Installing the Touch Driver If the AutoStart feature is not active Rear View of Monitor-Landscape Orientation Monitor Mounting OrientationRear View of Monitor-Portrait Orientation Landscape Mounting Orientation Angle Views 90º 90º Portrait Mounting Orientation Angle Views About Touchmonitor Adjustments OPERATION OSD Control Buttons On-Screen Display OSD Control Box1 AUTO/SEL select 2 DOWN 3 UP 4 MENU OSD Menu Functions Power Lock/Unlock OSD Lock/Unlock OSD Control Options Miscellaneous Sharpness Recall DefaultsRecall Recall Color Display Information Preset Display Modes ProblemSuggestions TROUBLESHOOTINGSolutions to Common Problems Refer to the On-Screen Display OSD TOUCHMONITOR SAFETY APPENDIX Care and Handling of Your Touchmonitor Waste Electrical and Electronic Equipment WEEE Directive TECHNICAL SPECIFICATIONS ET2039L Speciﬁcations Dimensions HxWxD Video Signal ConnectorPower Input Weight ET2039L 20” LCD Touchmonitor Dimensions I. Electrical Safety Information REGULATORY INFORMATIONII. Emissions and Immunity Information B Notice to Users in Canada This equipment complies with the Class A limits for radio noise emissions from digital apparatus as established by the Radio Interference Regulations of Industry Canada a Verify as an emission source by turning the equipment off and on III. Safety Label WARRANTY Product less depreciation calculated on a straight-line basis over Seller’s stated Warranty Period News on upcoming events Press release Software drivers Check out Elo’s WebsiteGet the latest Product information Speciﬁcations Touch Monitor Newsletter