2444MP3 DE,GB,FR &HR 9/7/05 3:29 PM Page 018
INSTALLATION
FOR TABLE TOP
•Put the main unit and the speaker on a piece of soft cloth, which for preventing scratches the unit front panel.
•Use your finger press on the decoration part, which are at the groove of the main unit rear cabinet and slide down to release away it from the groove.
•Insert the support plate into the groove.
•Slide up the support plate until it is locked.
•If you put your equipment on a glass table or a very smooth surface. The main unit and speaker box would be easy to move by hand pushing. You could insert the rubber sleeve to the bottom of the support plate.
•This product is designed both for placing vertically and horizontally. Removing the support plate away for horizontal placing. The display can be rotated staying in 1 of 3 kind of viewing angle (30º, 60º, 90º) as you like.
RUBBER SLEEVE
SUPPORT
PLATE
SLIDE DOWN THE
DECORATING PART TO
REMOVE FROM MAIN
UNIT REAR CABINET
FOR WALL MOUNTING: |
|
1. Use the |
|
with unit to make anchor hole marks on | Screw |
the wall. Make sure the marks are |
|
leveled. |
|
2.Drill 3/16" holes on the marks.
3.Insert the plastic anchor supplied with unit through the hole and tap it until it is flush with the wall.
4.Inset the screw and tighten the screw 3mm sway from the wall.
5.Hang the main unit and the speakers to
the screw. | Plastic Anchor |
