eMachines DUV1000 manual ISP Parameters, ISP Phone Number, ISP User Name, ISP Password

DUV1000 User’s Guide

Note:

¾If power goes off while you are configuring, the phone will work with the previous saved parameters.

¾If you idle more than 90 seconds, DUV1000 will accept the keys entered and go to next state.

¾If you leave the phone without completing the configuration it will go back to idle state without saving the parameters.

6.1ISP Parameters

DUV1000 needs to connect to the Internet to make Internet phone calls. The following information should be configured in DUV1000 to connect to the Internet and make calls. The user will get this information while subscribing to Internet Service Provider (ISP). Please note that DUV1000 will not work without this information.

ISP Phone Number

This is the phone number to which DUV1000 will dial-up to connect to the Internet. The Internet access phone number can be maximum 20 digits. If you enter more digits and try to save, you will hear a prompt “The parameter you have entered is incorrect, Press ‘1’ to edit, ‘2’ to skip”. Press ‘1’ or ‘2’ appropriately.

DUV1000 normally dials out with DTMF tones. However, if Internet access phone number is configured to start with a ‘$’, then the phone dials out in pulse mode.

DUV1000 supports a mode called blind dialing mode. In this mode, DUV1000 won’t look for dial tone on line before dialing the ISP number. User can enter '&' (Ampersand) as first character in ISP Phone number (or as second character if first character is '$' for pulse mode dialing) for dialing ISP number in blind mode.

Warning: In blind dial mode DUV1000 won’t prompt any error messages related to line conditions.

DUV1000 has special supports for operation behind an EPABX. In some scenarios, you may have to introduce a delay after dialing external access number or wait for secondary dial tone. A ‘.’ (dot) in phone number will introduce a delay and a ‘_’ (under-score) will look for secondary dial tone. For example, 9.6788341 will introduce a small delay after dialing 9, before dialing other digits.

ISP User Name

The user name identifies the user to Internet Service Provider (ISP). It can have a mix of digits, lower and upper case letters, and special characters. The user name can have a maximum of 30 characters. Please refer to Appendix A: Procedure for entering alphanumeric and special characters to enter special characters.

ISP Password

The password used for verifying the user to Internet Service Provider (ISP). It can have a mix of digits, lower and lower case letters, and special characters. It can have a maximum of 30 characters. Please refer to Appendix A: Procedure for entering alphanumeric and special characters to enter special characters.

13