Using Your eMachines Flat-Panel Monitor

Setting up the optional stand

Attaching the USB stand

In the United States, you can buy an adjustable USB stand from www.gateway.com. You can adjust the stand for height, tilt, and screen rotation. When the stand is connected to your computer’s USB port, you can connect up to four USB devices to the USB 2.0 ports on the stand.

To attach the adjustable stand:

1Make sure that the monitor is turned off.

2Place the monitor face-down on a stable, soft (non-marring) surface. A non-slip mat on a tabletop is ideal. Let the monitor base hang down over the edge of the table.

3Remove the screw from the neck hinge, then remove the neck from the LCD panel.

Screw

4Remove the four small screws from the back of the LCD panel. Save the four screws.

Screw

Screw

Screw

Screw

5Slide the adjustable stand’s neck onto the base.

6