www.emachines.com

Setting up the optional speaker bar

Power/Volume control

Kensington lock slot

Power indicator

Headphone jack

Microphone jack Headphone jack

Bass port (for bass sound. Do not block.)

Bass port (for bass sound. Do not block.)

Installing the speaker bar

To install the speaker bar:

Tip (19-inch model)

When using the optional speaker bar, we recommend that you use the included right-angle VGA cable for the video connection so the speaker bar does not obstruct the cable. In the United States, if you are using a DVI connection, you can order a right-angle DVI cable from www.gateway.com.

1Tilt the screen back, then center the speaker bar below the screen. Make sure that the speakers face forward.

2Tighten the two thumbscrews on the back of the speaker bar.

3Connect the speaker bar’s USB power cord to any available USB port on your computer.

4Connect the speaker bar’s headphone (green) and microphone (pink) cables to your computer’s headphone and microphone jacks.

5If your computer is not already on, turn it on.

11