Using Your eMachines
9Slide the neck’s bracket slot onto the bracket’s mounting tab.
10Press the bracket lever to the right and hold it, then lower the neck into place and release the lever.
Adjusting monitor height tension
The stand is factory adjusted to maintain the height for your monitor. However, if it does not stay in place when you let go, you need to change the stand’s height tension. You also need to adjust the stand if the amounts of force required to raise and lower the monitor are not equal.
To adjust your monitor’s height tension:
1Press the screwdriver access hole cap from below the base to remove it from the base.
Screwdriver access cap
8