Silent Installations and Removals
5.Create a response file for the Server Utility by issuing the command below. The command consists of the text retrieved from the Server Utility registry and additional switches as shown below.
The command will launch an InstallShield Wizard. Pathname or filenames containing spaces must be in double quotation marks. For example, "C:\my dir\my file.cfg".
ServerUtilUninstallString -r -f1fullpath\responsefilename
where
ServerUtilUninstallString
Is the Server Utility UninstallString text listed in step 3 on page
Indicates that a response file will be created.
-f1fullpath\responsefilename
Specifies the full pathname and filename of the response file.
Performing a silent removal
1.On another attached server (not the same server on which you created the response file), open a command line window.
2.Enter the command below to remove the Server Utility.
Important By creating the response file, a removal occurred on the server where the file was created. This is why you do not need to perform this step on that server.
ServerUtilUninstallString
where
ServerUtilUninstallString
Is the Server Utility UninstallString text listed in step 3 on page
EMC CLARiiON Server Support Products for Windows Installation Guide
