Operator’s
Manual
Series 185 Automatic Transfer Switches
100 through 400 ampere sizes
DANGER is used in this manual to warn of high voltages capable of causing shock, burns, or death.
WARNING is used in this manual to warn of possible personal injury.CAUTION is used in this manual to warn of possible equipment damage.An experienced licensed electrician must install the ATS.
Refer to the outline and wiring drawings provided with your ASCO Series 185 ATS for all installation details.
ASCO Series 185 Automatic Transfer Switches (ATSs) are Listed under Underwriter’s Laboratories Standard for Transfer Switch Equipment,
Refer to Application Informaton
This automatic transfer switch is intended for standby power applicatons in residential / light commercial use only.
This product is not intended for emergency or life–support systems.
If you have more stringent application requirements contact ASCO Power Technologies for other products suitable for critical applications.
Rating Label
Each automatic transfer switch contains a rating label to define the loads and fault circuit withstand / closing ratings. Refer to the label on the transfer switch for specific values.
Do not exceed the values on the rating label. Exceeding the rating can cause personal injury or serious equipment damage.
TABLE OF CONTENTS
page INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . 1 CONTROLLER . . . . . . . . . . . . . . . . . . . . . . . .
50 Hanover Road, Florham Park, New Jersey |
|
For sales or service call 1 800 |
|
ASCO POWER TECHNOLOGIES CANADA PO Box 1238, 17 Airport Road, Brantford, Ontario, Canada N3T 5T3 telephone 519