Emerson 7000 manual Serial Module, Connectivity Module, Telephone Interface Module, Module 72A

ASCO 7000 Series Power Monitoring & Control

PowerQuest is a PC based software package. When combined with the ASCO Communication Interface Module (Acc 72A), the ASCO 5120 Telephone Interface Module and ASCO 5200 Series Power Manager, as shown above, it provides the most economical communication system for monitoring and control of power transfer switches and engine generators.

The local RS-485 network allows communications with up to 32 power transfer switches and four engine generators. An analog phone connection and ASCO telephone interface module allow for direct dial up, monitoring and control of remote locations. The ASCO Power Manager not only allows you to view current power and power factor readings, but also has a programmable KW set point to initiate transfer of loads to a standby source for peak shaving operations.

5110 Serial Module

Serial Module (5110) is used to allow local or remote communications with ASCO PowerQuest® or SiteWeb™ communication products.

The module is used to connect the 7000 Series Transfer Switches, and ASCO Power Managers to the serial network via an RS-485 interface. The module has two port connectors used for ATS & Standalone Power Manager connectivity. The serial connection is accomplished from a 5-pin terminal header/socket block. The module is designed to communicate with up to 32 devices.

Fig. 17: Serial

Module 72A

5150 Connectivity Module

Connectivity Module (5150) is used to bring several different serial devices that communicate at different baud rates and with different protocols to a common Ethernet media.

The module is used to connect 7000 Series Transfer Switches, and ASCO Remote Annuciators to the standard Ethernet TCP/IP network with standard 10base T(RJ-45) connector. The module has been built in customized JAVATM applets (program applications for an internet browser) for each monitored device that loads automatically to a standard Web Browser.

The module is designed to communicate with up to 8 clients simultaneously with Web applications (web pages), PowerQuest® , or third party Modbus devices over an Ethernet connection.

Fig. 18: Connectivity

Module 72E

Fig. 19: Telephone Interface Module

5100 Telephone Interface Module

(for use with PowerQuest® )

The ASCO Telephone Interface Module (TIM) allows users to dial directly into their ASCO communications network for monitoring and/or control. The TIM connects to the ASCO communication network via RS-485 and the phone port connects directly into an analog phone jack. Also, the TIM has an RS-232 connector which allows the TIM to be used as the dialing modem.

Supplied with 120 VAC to 18 VDC (nominal) UL approved, class 2 power supply.

Page 17