![](/images/new-backgrounds/1320763/32076375x1.webp)
D E C 2012 | DANIELTM MODEL 788DVC DIGITAL CONTROL VALVES |
PERSONAL INJURY AND/OR EQUIPMENT DAMAGE
Caution is required when performing any disassembly procedure as the Cylinder head is bolted to a spring loaded cylinder assembly. Service should only be performed by trained and qualified service personnel.
Failure to comply with recommended could result in serious injury and/or damage to the equipment.
e.Lower the “new” cylinder assembly and cylinder head into the valve body. Align the bolt holes in the cylinder head with the studs in the main valve body.
f.Fasten the cylinder head into position using retaining nuts. Tighten nuts, alternating to opposite sides, to assure a uniform seat.
g.Return all tubing and/or valve accessories to their original position.
DISASSEMBLY AND REASSEMBLY |