BP7357 CF180 BRIDGETON 9/19/07 11:21 AM Page 7
8. Turn the fan motor and housing assem- bly upside down in preparation for mounting the fan blade assemblies. Remove and discard the three shipping retainers securing the motor hub in the motor housing.
NOTE: Take care not to scratch the fan housing when installing the blade assemblies.
9. Insert a
10. Align one of the threaded holes in the motor hub with one of the slots in the adapter plate (Figure 6). Position the blade flange on the motor hub so one of the screws in the blade flange aligns with this threaded hole. Loosely tight- en the screw. Rotate the motor hub until the other flange screw can be tightened through the slot of the adapter. Repeat this procedure for the remaining four blade assemblies, then securely tighten all the screws.
ADAPTER
ASSEMBLY
WHITE WIRES
ADAPTER PLATE
BLACK
WIRES
Figure 7
12. Partially install two
13. Position the two slots in the adapter/light fitter assembly over the
ADAPTER PLATE
MOTOR HUB
Figure 6
SLOT FOR FLANGE 
SCREW ACCESS
BLADE FLANGE
two
INSTALL ONE
PAN HEAD SCREW
TIGHTEN TWO
SCREWS
11.Connect the white wire from the light fitter to the white wire from the motor (Figure 7). Connect the black wire from the light fitter to the black wire from the motor. Make sure both con- nectors are securely engaged.
ADAPTER/LIGHT
FITTER ASSEMBLY
Figure 8
14. Install another
15. You have completed the assembly of your new ceiling fan. You can now pro- ceed with hanging and wiring your fan.
7 | U.L. Model No.: CF180 |
