Trouble Shooting
! WARNING: For your own safety, turn off power at fuse box or circuit breaker before trouble shooting your fan.
TROUBLE | PROBABLE CAUSE | SUGGESTED REMEDY |
|
|
|
1. Fan will not start. | 1. Fuse or circuit breaker blown. | 1.Check main and branch circuit fuses or circuit |
|
| breakers. |
| 2. Loose electrical connections to the fan. | 2.Check line wire connections to fan . |
|
| ! WARNING: Make sure main power is |
|
| turned OFF. |
| 3. Reversing switch in neutral position. | 3.Make sure reversing switch position is all the |
|
| way to one side. |
| 4. Fan wall switch is OFF. | 4.Turn the switch ON. |
| 5. Fan/Light remote control is OFF. | 5.Turn ON fan/light remote control. |
| 6. Remote control battery is weak. | 6.Replace the remote control batteries. |
|
|
|
2. Fan sounds noisy. | 1. Blades not attached to fan. | 1.Attach blades to fan before operating. |
| 2. Loose screws in motor housing. | 2.Check to make sure all screws in motor |
|
| housing are snug (not |
| 3. Screws securing fan blade flanges to | 3.Check to make sure the screws which attach |
| motor hub are loose. | the fan flanges to the motor hub are tight. |
|
| ! WARNING: Make sure main power is |
|
| turned OFF. |
| 4. Screws holding blades to flanges | 4.Tighten screws securely. |
| are loose. |
|
|
|
|
3. Fan wobbles | 1. Setcrews in motor coupling are not | 1.Raise coupling cover and tighten setscrews |
excessively. | tightened securely. | securely. |
| 2. Setscrew in hanger ball/downrod | 2.Tighten the setscrew in the hanger ball/ |
| assembly is loose. | downrod assembly. |
| 3. Screws securing fan blades to motor are | 3.Check to be sure screws which attach the fan |
| loose. | blade to the motor are tight. |
| 4. Fan blades are not seated properly. | 4.Check to be sure that the screws securing the |
|
| fan blades seat firmly. |
| 5. Hanger bracket and/or ceiling outlet box | 5.Tighten the hanger bracket screws to the |
| is not securely fastened. | outlet box, and /or secure outlet box. |
| 6. Fan blades out of balance. | 6.Interchanging an adjacent |
|
| blade pair can redistribute the weight and |
|
| result in smoother operation. |
|
| Or use supplied balancing kit to balance |
|
| blades. |
|
|
|
17 | U.L. Model No.: CF230 |