Using Your Ceiling Fan

1.Screw three 25-watt (maximum) candelabra base lamps (supplied) into the uplight sockets on top of the fan housing assembly (Figure 14).

2.Slide the large pendant onto the the speed control pull chain, secure by connecting the coupling to the chain. Slide the pendant onto the accent light pull chain, secure by connecting the coupling to the chain. (Figure 15).

3.Assembly of the ceiling fan is now complete. Restore electrical power to the branch circuit at the fuse box or breaker panel.

4.When controlled by a wall switch, check the operation of accent light by gently pulling on the 2-position accent light control pull chain. (This switch has the shorter pull chain.) The speed control operating sequence is as follows:

THREE-SPEED

1st Pull—HIGH

2nd Pull—Medium 3rd Pull—Low 4th Pull—OFF

5.When operated by an Emerson Remote Control, check operation of fan and light in accordance with the Remote Control Owner’s Manual.

6.All fans are shipped from the factory with the reversing switch positioned to circulate air downward.

7.If airflow is desired in the opposite direction, turn the fan off and wait for the blades to stop turning. Then slide the reversing switch, located on switch cup, to the opposite position (Figure 15) and turn the fan on again. The blades will turn in the opposite direction and reverse the airflow.

Reverse Switch Information

Season

Rotation Direction

Switch Position

Summer

Counter-Clockwise

Right

 

 

 

Winter

Clockwise

Left

25-WATT (Max.) CANDELABRA

 

 

 

UPLIGHT

BASE LAMPS (3)

 

 

 

SOCKETS (3)

 

 

 

 

 

Figure 14

REVERSE

SWITCH

ACCENT LIGHT

SPEED CONTROL

PULL CHAIN

 

PULL CHAIN

PENDANT

LARGE

PENDANT

 

COUPLING

COUPLING

Figure 15

9

U.L. Model No.: CF4801 and CF4501

Page 9
Image 9
Emerson CF4801ORB00, CF4801GBZ00, CF4501GBZ00, CF4801BS00, CF4801VNB00, CF4801WW00 Using Your Ceiling Fan, Three-Speed