THIS FAN IS SUITABLE FOR WET LOCATIONS SUCH AS
PORCHES, PATIOS, AND DECKS.
This Manual is Designed to Make it as Easy as Possible for You to
Assemble, Install, Operate and Maintain Your Ceiling Fan
Tools Needed for Assembly
One Phillips head screwdriver
One stepladder
One wire stripper
Three wire connectors (supplied).
MATERIALS
Wiring, electrical box and box connectors must be of type required by the local code. The minimum wiring would be a
Installed Wire Length | Wire Size A.W.G. |
Up to 50 ft. | 14 |
50 - 100 ft. | 12 |
!WARNING
Before assembly your ceiling fan, refer to section on proper method of wiring your fan (page 7). If you feel you do not have enough wiring knowledge or experi- ence, have your fan installed by a licensed electrician.
Unpacking Instructions
For your convenience,
!WARNING
Do not install or use fan if any part is damaged or missing. Call
!WARNING
This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Co. Substitution of parts or acces- sories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage.
Check to see that you have received the following parts:
A.Fan motor assembly
B.One ceiling cover
C.Five blade flanges
D.Five fan blades
E.One hanger ball/downrod assembly
F.One hanger bracket.
G.One loose parts bag containing:
1.Sixteen M5 x 6 washer head blade screws
2.One M6 x 14 flange screw with lockwasher
3.One wood ball
4.Three wire connectors
5.One clevis pin
6.One hairpin clip
7.Two threaded studs
8.Two lockwashers
9.Two knurled knobs
10.One chain coupling
NOTE: Place the parts from the loose parts bag in a small container to keep them from being lost.
AB
C
D
G
E F
3